ZENOLOGY® Wall Bracket Single Holder - catalog image

Wall Bracket Single Holder

€39

Description

A decorative wall bracket designed to neatly hold and display one full-sized 500 ml (16.91 fl. oz.) bottle.

How to use

Screw method:
1. Apply bracket level to the wall, measure 48”/120 cm from floor to bottom of bracket.*
2. Mark drill holes with pencil.
3. Drill holes, drill depth minimum 40 mm
4. Insert wall anchors into hole by carefully tapping with hammer.
5. Clean all surfaces with included alcohol wipe and dry thoroughly prior to installation to remove any greasy residue.
6. Peel off backing of adhesive strip on bracket.G. Aim the bracket towards the drill holes, press entire bracket to wall and ensure tape has adhered to surface.
7. Install with included screws through the bracket in to the wall anchors.
8. Place the Spaza key in the key slot. Move the hook aside, place the bottle and swing back the hook around the cap.

Tape method:
1. Measure 48 inches (120 cm) from  oor to top of bracket and mark position with pencil or piece of masking tape.*
2. Clean all surfaces with included alcohol wipe and dry thoroughly prior to installation to remove any greasy residue.
3. Peel off backing of adhesive strip on bracket. Aim the bracket towards the wall in level. Press entire bracket against wall for 60 seconds to ensure bracket has adhered to surface.
4. Apply a thin bead of bathroom-grade sealant around the edge of each bracket unit. B. Install cover plugs in the bracket screw holes.
5. Leave bracket on the wall for at least 24 hours before use. For best result 48 hours.
6. Place the Spaza key in the key slot. Move the hook aside, place the bottle and swing back the hook around the cap.